Wednesday, January 11, 2012

Chinese New Year Craft-Spin Drums

It has  taken me awhile to warm up to 2012, even though it has some really cool things going for it. I mean seriously, it it the last time in my lifetime I will be able to enjoy a date like 1/1/1, 2/2/2, and so on. This year is gonna be 12/12/12 at the end of the year and well, it's a bit sad we won't see 1/1/1 until January 1, 2101! That's 89 years folks and I hope my DD's get to see it.

I was glad to see it's not too late to celebrate the New year! The Chinese New Year on January 23 that is. So I have a project....Chinese Spin Drums! I made these with my Brownie Girl Scouts, and will make a few more for home too since the are so much fun. I'll show you how to make yours and also share the cutting files below. I found the idea on FamilyFun.com and adapted it to make it fit my needs. The one below has a dragon cut from the Chinese New Year SVG set from SVGCuts.com....
The dragon cut so well on my Zing, despite the tiny bits due to being about 2.5 inches tall Great file!


OK so here is how I made the spin drums!

 You'll need the 6 cut pieces from the file: two large circles for the ends of the drum, the center band, the two end decorations(mine have Chinese dragons downloaded from the internet and printed on) and the little "pizza table" style cut piece shown in white here...Also about 14 inches of yarn, a Japanese style round chopstick, two beads, a piece of ribbon. And glue!
I drew in the score lines here to show where the "pizza table" goes and what the different holes are for
 First fold the funny pizza table looking thing so that it stands up a bit and has tabs at the end. Place a glue dot in the center of the square created with the score marks on the red piece of paper. Then glue the tabs of the table onto either side of the square, but don't push the "table" down...instead let it sit above the red paper.
 Place a glue dot in the center of the square. Then glue the tabs of the table onto either side of the square, but don't push the "table" down...instead let it sit above the red paper.
Overlap the ends of the long strip glueing it down and be sure to get the holes lined up and the edges flush.
 This is where the chopstick goes into the drum. Be sure to put the flat edge in first.
 The chopstick should be snug within the hole and then go through the pizza table too. Place your hand on top of your drum and push the chopstick firmly onto the glue dot.
 The tie the yarn or string right to the middle of the chopstick so that there are equal amounts on either side.
 After threading the yarn through the side holes make sure the "drum" portion is well rounded by adjusting it a bit and then tie a knot to help it keep it's shape. Do this on both sides and make it snug. This is important to help keep the whole thing form getting loose as it spins too.
 Fold the flaps of the long strip in a bit and put glue on the tabs.This shows the yarn tied and also the tabs gently folded in. This view looks through the inside of the drum and the glue goes on the outside of the tabs so turn i over to apply the glue evenly.
Be sure your glue is all the way to the edges of all the flaps for it to be secure. Place the large circle on the end and fiddle till your happy with the fit. It wont be perfect but it should be even.

 Once the end piece is a set a bit, turn the whole thing over and use a pen or something to press the tabs down.
 Mark the place for the bead with a pen by bringing it up and measuring(eyeballing) where it meets the center of the drum. Then tie a bead on each end where the mark is.

 Decorate the smaller circle with a fun drawing or print out and enjoy!
  It works best if you hold it between your hands with your palms flat and rub them like you are trying to warm up...My little one had fun demonstrating! :)
Here are files: Just for reference the largest circle should measure 3inches.
For SCAL just import the SVG...if you do not own an electronic die cutting machine, the PDF can be printed and cut by hand. Then use a hole punch where required.
MTC
SVG
PDF

add this to your Pintrest Board...
Pin It






1 comment:

Cindy@ Scrap-obsessed.blogspot.com said...

How cute is that?! What a fun idea. Thanks for sharing your directions.

Thanks for stopping by and adding your thoughts....

Blogaholic Designs”=